Cisco 7204 Installing page 6

Hide thumbs Also See for 7204:

Table of Contents

Rack-Mounting the Cisco 7204

Figure 3-3

We recommend that you allow at least one or two inches of vertical clearance between the

router and any equipment directly above and below it.

Warning

near the bottom of the rack. To see translated versions of this warning, refer to the

publication Regulatory Compliance and Safety Information for the Cisco 7200 Series

Routers (Document Number 78-3419-xx) that accompanied your Cisco 7204.

3-6 Cisco 7204 Installation and Configuration Guide

Installing the Chassis in a Four-Post 19-Inch Rack

To maintain a low center of gravity, ensure that heavier equipment is installed

Cisco 7200

SERIES

ETHERNET-10BFL

FAST ETHERNET INPUT/OUTPUT CONTROLLER

Table of Contents