Grundfos, are subject to the warranty provided by the manufacturer of said products CONTENTS and not by Grundfos' warranty. Grundfos will not be liable for damage or wear to Page products caused by abnormal operating Limited warranty conditions, accident, abuse, misuse,...
Product number operation. Type designation (see 3.2 Type key) 2. Applications Serial number The Grundfos MTA pump is a single-stage Frequency centrifugal pump designed for the pumping of Supply voltage cooling lubricants and cutting oil for machine tools.
3.2 Type key 5.1 Mechanical installation 5.1.1 Pump position Example MTA 110 H -180 -A -WB -A -T Only mount MTA pumps in vertical Caution Type range position. Rated flow [l/min] Pressure type Min. 2" Installation length [mm] Pump version A = Standard version Thread type WB = Internal NPT thread...
Before the pump is returned to Grundfos for service, the certificate of cleanliness must be filled in and sent to Grundfos. See page 9. If Grundfos is requested to service the pump, it must be cleaned before it is returned.
8. Fault finding Warning Before starting fault finding, switch off the power supply. Make sure that the power supply cannot be accidentally switched on. Fault Cause Remedy Motor does not Supply failure. Connect the power supply. run when power Fuses are blown. Replace the fuses.
This product or parts of it must be disposed of in an environmentally sound way: 1. Use the public or private waste collection service. 2. If this is not possible, contact the nearest Grundfos company or service workshop. Subject to alterations.
Page 9
It is the senders responsibility to package, transport and complete the shipping documents regarding the nature of the product shipped. Irrespective of this, Grundfos reserves the right to reject the service order for other reasons. Grundfos will rely on this representation and will look to the customer for reimbursement of any and all costs, claims or damages incurred, including attorney’s fees, if any representation...