Step 1: Calibrate The Listening Zone; Step 2: Calibrate The Surround Speaker Position - Philips Fidelio E6 User Manual

Step 1: calibrate the listening
zone
This step is to optimize surround experience
through balance of your seating position.
1
Place the wireless surround speakers on
two seating positions you prefer most
(such as on a sofa).
• Make sure that the wireless surround
speakers are wirelessly connected
to the main unit (press SOD on the
wireless speaker).
2
Press and hold
remote control for three seconds to
trigger calibration.
» (zone) is displayed on the
display panel.
» You can hear the calibration tones
from the wireless surround speakers.
3
Wait until the calibration tones end.
» ->SPEAKER (speaker) is displayed on
the display panel.
4
Then perform the following Step 2
(calibrate the surround speaker position)
to complete and store the new settings.
16 EN
Step 2: calibrate the surround
speaker position
This step is to optimize surround experience
through balance of the placement of wireless
surround speakers.
1
2
on the
3
Place the wireless surround speakers on
the position you prefer.
• Make sure that the wireless surround
speakers are wirelessly connected
to the main unit (press SOD on the
wireless speaker).
Press CALIBRATION once to trigger
calibration.
Press CALIBRATIONthree times to
•
trigger calibration if you re-locate the
wireless surround speakers and skip
Step 1 (calibrate the listening zone)
after you completed a round of spatial
calibration previously.
» You can hear the calibration tones
from the wireless surround speakers.
Wait until the calibration tones end.
» If the calibration succeeds, DONE
(done) is displayed on the display
panel. And the new settings are stored.