Logon - Christie LX41 User Manual-Network Manual

3. Web Control

3.1 Logon

To use the Web Control function, you need to logon with your user name and
password. (&12)
Refer to the following for configuring or controlling the projector via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Make sure that your computer and the
projector is connected via network, and then
start Web browser.
Enter the projector's IP address into URL
input box of the Web browser as the
example below, and then press the Enter
key or button.
Example: If the IP address of the projector
is set to 192.168.1.10:
Enter "http://192.168.1.10/"
into the address bar of the web
browser and press the Enter key
or click
Display the logon window as shown on the right.
2) Enter your user name and password, and then click the [OK].
NOTE
• The language used on the Web Control screen is the same as that
of the OSD on the projector. If you want to change it, you need to change the
OSD language on the projector. (&SCREEN menu in the Operating Guide)
LX41/LW41 User Manual - Network Guide
button.
11
020-000508-01 Rev. 1 (06-2012)