Subscribe to Our Youtube Channel
Related Manuals for NSK SGR2-E
Summary of Contents for NSK SGR2-E
- Page 1 BONE SURGERY MICRO SAW HANDPIECE SGR2-E/SGO2-E/SGT2-E The EU directive 93/42/EEC was applied in the design and production of this medical device. OM-H0187E ’10.00.00 N...
- Page 2 CAUTION · Place the most priority for the safety of all patients. · For professional use only. Do not make wrong use of the handpiece. This product is produced for bone surgery micro saw handpice only. Do not use other usage. ·...
- Page 3 · Only connect with the standard motor according to ISO 3964. · Optional NSK blade (6 Oscillating, 3 reciprocating and 2 sagittal) are available. D-shape shank (diameter Ø2.35) and U-cut hub can · Be sure to remove the blade before detaching the handpiece from the Micromotor.
- Page 4 2. Connection of Handpiece and Motor 3. Mount/Removal of Blade Chuck Nut Insert 2-1 Connecting the Handpiece to the Micromotor Mount the NSK reciprocating / oscillating / sagittal Blades (option). Chuck Simply push the handpiece directly onto the Micromotor. (Fig. 1) U-cut 3-1 Mounting Blade...
- Page 5 Gently loosen the Chuck Nut with the Spanner Wrench. Loosen another 2-3 turns by hand and pull to remove the blade. Tighten the Chuck Nut NSK reciprocating / oscillating / sagittal Blades are available. Refer to the table for blade lengths in spec. lightly after removal. (Fig.3)
- Page 6 Remove the blade from the handpiece. Insert an Irrigation Tube in an External Spray Fig. 4 *Picture shows SGR2-E. 2) Insert into an autoclave pouch. Seal the pouch. Nozzle firmly and wash away saline solution remaining behind in a nozzle with pure water.
- Page 7 CAUTION · Sterilization is required first time you use and after each patient. · Always place the handpiece in the center or upper shelf of the chamber, as the local temperature at the bottom of chamber could rise beyond the set value. ·...
Need help?
Do you have a question about the SGR2-E and is the answer not in the manual?
Questions and answers