Page 1
OWNER’S MANUAL Tower Trainer Please review this important assembly, safety and warranty information about your new Merrithew equipment and keep it handy for future reference. ™...
Page 2
PART IDENTIFICATION Required Tools 1/4" (6mm) Hex Key Adjustable Wrench Tower Trainer ™ 1 Eyehook 23 Inner Cover 2 Upper Tube Assembly 24 Right Upright 3 Safety Chain 25 Push-Thru Bar 4 Spring Clip 26 Push-Pin 5 Large Securing Knob 27 Fuzzy Hanging Straps [fig.
Page 4
250 lbs (113 kgs). uneven surfaces. The Tower Trainer should be used by only one person at a Make sure that adequate space is available for access to time. Do not allow children to use or be around equipment and around the Tower Trainer.
Page 5
ASSEMBLY INSTRUCTIONS Assembling the Tower Trainer STOP! Please do not attempt to assemble on your own. This is, at minimum, a job for two people. Read these instructions completely before beginning. Place all parts from the box in a cleared area and position on the floor in front of you.
Page 6
ASSEMBLY INSTRUCTIONS Assembling the Tower Trainer cont’d 4. Attach the sliding stability bar [30] to the left and right 6. Tighten the button head bolts [43] to secure the sliding stability sliding stability bar holders [7, 28] with button head bolts [43], bar [30].
8. Place the main frame [14] with the mat side face down. 9. Unfold the extension frame [18] from the main frame [14] Attach the extension frame [18] by placing it (mat side up) and turn the mat side face up. Attach the Main frame [14] to the on top of the mat frame, aligning hinge brackets.
[26] to release. Then you can insert the push-pin [26] into the adjustment hole. Always make sure the safety chain [3] is connected when the push-thru bar [25] is in use in the rotating positions. Tower Trainer Owner’s Manual ™...
Page 9
Using the Push-Thru Bar Springs from Above Springs from Below When doing exercises that require the spring resistance to come CAUTION! If using the push-thru bar with springs from from above the bar, attach the push-thru spring [36] to the below, attach safety chain first.
Page 10
Attach leg springs [34] to eyehooks at desired height with the locking spring clips [38]. Attach the other ends of the springs to the padded long-spine straps [35]. Ensure the clips are completely closed and secured. 38 Tower Trainer Owner’s Manual ™...
Page 11
Storage & Mobility When folding or unfolding the Tower Trainer , keep all children away from the Tower Trainer and make sure hands and feet are WARNING: ™ clear of any folding or pinch point. Folding Moving a. Move any attached accessories to the back side of the tower so To move the Tower Trainer, it must be folded.
MAINTENANCE & REPLACEMENT PARTS Replacement Parts For more information and to place an order, visit merrithew.com/replacementparts or email equipment@merrithew.com Replacement Spring Package Roll-Down Springs, Black Roll-Down Bar Replace springs every 24 months, or as Supports the roll-down bar. Can also Shown with springs attached.
Push-Pin Safety Chain Spring Clips Replace spring clips every 12 months or Used to secure push-thru bar. For use with push-thru bar. earlier as needed. CAUTION: Safety chain must be in place CAUTION: Locking spring clips are when using push-thru springs from above. required when using pu sh-thru bar with springs from below.
Five (5) Year Limited Warranty Neither distributors, dealers, web resellers, nor the retailers selling this Merrithew will, at its option, repair or replace any of the parts listed below, product have any authority to make any additional warranties or to provided that the part(s) fail due to a defect in workmanship or materials: promise remedies in addition to, or inconsistent with those stated above.
Page 15
Our Wall Charts are printed with vegetable-based inks on FSC paper. A step-by-step exercise guide for the Tower Trainer repertoire can be downloaded by visiting merrithew.com/guide Make the Most of Merrithew Equipment ™...
Page 16
Can’t get online? Please fill out the warranty card enclosed with this product, and return to us. This is your Tower Trainer Serial Number: 2200 Yonge Street, Suite 500, Toronto, Ontario, Canada M4S 2C6 416.482.4050 | 1.800.910.0001 | 0800.328.5676 UK | ext. 0907...
Need help?
Do you have a question about the Tower Trainer and is the answer not in the manual?
Questions and answers