End Time; Time; Childproof Lock - Bosch HBA73A 1 Series Instruction Manual

End time

The oven allows you to set the time when you want the food
ready. The oven switches on automatically and switches off at
the set time. E.g. the food may be placed in the oven in the
morning and the oven set so that it is ready at midday.
Please ensure that the food will not go off if it is in the oven for
too long.
Example in the picture: It is now 10:30 AM, the cooking time is
45 minutes and the oven should switch off at 12:30 PM.
Set the function control knob.
1.
Set the temperature control knob.
2.
Press the button twice.
0
3.
Set the cooking time with the
4.
Press the 0 button.
5.
The brackets are shown next to
ready is displayed.
Delay the end time using the buttons
6.
The oven displays the programmed time after a few seconds
and is set to standby. The time when the dish will be ready is
displayed and the end time
brackets. The symbols
U
turned on, cooking time progress is shown and the symbol
appears in brackets. The symbol

Childproof lock

The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
Activating the childproof lock
Set the function control knob to the zero setting.
Press the button for approximately four seconds.
D
The display panel shows the symbol
now activated.
8
or buttons.
@ A
. The time the dish will be
p
@ or A .
symbol will be shown in
p
and turn off. When the oven is
0
is turned off.
p
. The childproof lock is
D
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show
‹‹
cooking time with the
twice and turn the function control knob to the zero setting. The
oven is off.
Changing the end time
Change the end time using the buttons
shown after a few seconds. If the timer has been programmed,
first press the button twice. Do not change the end time if the
0
cooking time has already started to count down. The final result
may not be the same.
Cancelling the end time
Reset the end time to the current time by pressing
time is shown after a few seconds. The oven switches on. If the
timer has been programmed, first press the
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer
U
the actual time , press the
0
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.

Time

Once the oven has been connected or after a power cut, the
symbol and four zeros are shown on the display panel. Set
0
the time
Press the button.
0
1.
The display panel displays the time
Adjust the time with the buttons
2.
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
Press the button four times.
0
1.
The time symbols light up on the display panel, the brackets
are located next to
Adjust the time with the buttons
2.
The programmed time is displayed after a few seconds.
r
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Turning off the childproof lock
Press the D button for approximately four seconds.
The D symbol on the display panel goes off. The childproof
lock is now deactivated.
: . Press the button. Programme a new
‹‹ 0
or buttons. Or press the
@ A
@ or A
0
, the cooking time , the end time
r
sensor repeatedly until the
0
.
‚ƒ ‹‹
or .
@ A
.
0
or .
@ A
button
0
. The new time is
A . The new
button twice.
or
p