Aux In; Playable File Requirements - auna Kentucky Manual

AUX IN

Listening to AUX-IN
1. Insert the provided Aux-in cable into the Aux-in Jack, the unit will
immediately goes into Aux-in mode. The LED display will indicate "AUX".
2. Use the controls on your Aux-in audio source to select your desired
songs.
Light Mode
Press the "LIGHT" ON/OFF button to open the LED power supply in the
product on the back of the panel colour switch. Switch the select to "PLAY"
and the colour will change gradually. Switch the select to "HOLD" to lock
the current LED colour.

PLAYABLE FILE REQUIREMENTS

MP3/WMA Music File requirements.
MP3/WMA file compatibility with this unit is limited as follows:
• Frequency: within 32 to 48 kHz.
• Bit rate: within 32 to 320 kbps (MP3), 40 to 192kbs (WMA).
• Maximum files: up to 999.
• Maximum folders: up to 99.
• File extensions: . mp3 or .wma.
Compatible USB Devices Or SD Cards
• USB Flash Drive: supports USB2.0 or USB1.1.
• File System: FAT16/32 (NTFS file system is not supported).
• Maximum files: up to 999.
• External HDD, card readers, and locked devices are not supported.
EN
31