Radio Operation - auna Kentucky Manual

BT Jukebox Instruction
Mode selection: Switch "BT" position, the CD panel LEDs will start flashing
fast.
Working on "CD Panel": when the LCD display is flashing quickly, with a
sound. BT pairing is initiated.
When the LCD display begins to flash slowly, mobile phone and
BT pairing has been successful. Mobile phone display"juke box".Then it can
connect with jukeboxes. Play the music.#
Notes
If the LCD display does not blink during pairing, you can turn off the "BT"
button, then reopen and attempt pairing again.
a.  :Press "PLAY" button, it will play. Press again, it will "PAUSE."

b.  : Press, select the previous song;
c.  : Press, select the next song;
d. Vol- : Volume – (you can press continuously or press all the time);
e. Vol+ : Volume+ (you can press continuously or press all the time),
but it will be alarmed when volume is maximum.
f. To end the pairing, press the MODE button to access other
functions or turn off the BT connection from the BT device.
You can also use your BT device to control the volume.

RADIO OPERATION

This Jukebox features an inbuilt FM Tuner with auto-search function and a
20 station programmable memory. When using for the first time, rotating
the POWER Rotary knob and the Jukebox will switch to standby mode.
rotating the "POWER" Rotary knob on the control panel or the POWER
button on theremote control to turn the Jukebox ON. The Jukebox should
start in FM radiomode, the LCD display will show "FM 87.5 MHZ" and the
speakers will emit a fuzzy sound (unless the frequency "87.5 MHz" contains
a radio station in your area). If it does not automatically start in FM radio
mode, press the MODE button on the Jukebox or the FUNCTION button on
the remote control until FM radio mode is entered.
Frequency range: FM 87.5--108 MHz
EN
29