CLEANING
MAINTENANCE
• In the event of accidental immersion of the appliance or if
water is spilt directly on the heating element when the bowl is
not in position, take the appliance to an Approved Service Centre.
Transport the appliance using the two side handles. To carry
the appliance, close the lid and lock it.
Clean the outside of the appliance's lid
using a damp cloth. Clean the silencing
pressure valve at the back of the lid. Pull out
the valve cover from the lid, then take out
the valve and clean it under running water.
Reassemble the valve and return it to its
original position in the lid.
Clean the upper part of the cooking bowl
using a damp cloth. Clean the area behind
the condensation collector using a damp
cloth. Rinse the condensation collector and
replace.
Note: The seal is non-
removable
from
the
metal plate.
Clean the seal on the metal plate
using a damp cloth then rinse
thoroughly. Do not use sharp objects.
39
Need help?
Do you have a question about the Cook4Me+ Connect and is the answer not in the manual?