HP ProCurve 3500yl Replacement Instructions page 2

5. Reinstall the top of the switch. Align the top cover pin with the hole.
Top Cover pin
Alignment
Hole
6. Reinstall and tighten all the screws securing the top.
7. Reconnect the power cable to the switch.
© Copyright 2006 Hewlett-Packard Develop-
ment Company, LP. All rights reserved. The
information contained herein is subject to
change without notice.
This document contains proprietary information,
which is protected by copyright. No part of this
document may be photocopied, reproduced, or
translated into another language without the
prior written consent of Hewlett-Packard.
Technical information in this document is
subject to change without notice.
Part Number: 5991-3817
January 2006
Printed in Singapore
*5991-3817*