Table of Contents
Advertisement
CLEANING & MAINTENANCE
IMPORTANT NOTE:
DO NOT SUBMERGE POWER BASE OR KETTLE IN WATER OR ANY
OTHER LIQUIDS. TO AVOID DAMAGING THE APPLIANCE, NEVER USE ABRASIVE OR HARSH
CLEANING PRODUCTS TO CLEAN THE KETTLE SURFACE.
In order to keep your Dash Rapid Kettle in pristine working order, follow the cleaning
recommendations periodically.
Fill the Kettle with water up to the 1L mark. Place on the Power Base and press the
1.
On/Off Button to turn ON.
After the water comes to a boil and the Kettle automatically shuts off, remove from the
2.
Power Base. Pour in a small amount of dish soap and soak overnight or for 8 - 12 hours.
Pour out the soapy water and rinse until no suds remain.
3.
Fill the Kettle with 1L of clean water and bring to a boil. Carefully pour out the hot water.
4.
Allow your Rapid Kettle to cool, then thoroughly dry with a soft cloth. Note: Make sure that
5.
the Kettle, Power Base and cord are completely dry before and after each use.
10 ∙ cleaning & maintenance
Advertisement
Table of Contents
