Hyundai KONA 2020 Manual page 103

Operating HomeLink ®
1. Press and release one of the
HomeLink buttons (1, 2 or 3) that
programed.
2. The HomeLink indicator (4) will
operate as below:
- Indicates Green and is continu-
ously ON (Fixed Code Garage
Door Opener)
- Flashes in Green rapidly (Rolling
Code Garage Door Opener)
Erasing HomeLink
OOS047095C
1. Press and hold the button (1) and
(3) simultaneously.
2. The indicator (4) is turned contin-
uously ON in orange for about 10
seconds.
3. Then the indicator (4) color
changes to Green and flashes
rapidly.
Release the buttons once the
green indicator flashes.
4. Now HomeLink button (1), (2) and
(4) memories are all cleared.
® buttons NVS ®
Z-Nav™ is a trademark of the Gentex
Corporation,
HomeLink
owned
Incorporated, Milwaukee, Wisconsin.
RSS ID: NZLUAHL5A
IC: 4112A-UAHL5A
i
Information
This device complies with Industry
Canada RSS-210 standard.
OOS047098C
Operation is subject to the following
three conditions:
1. This device may not cause harmful
interference.
2. This device must accept any inter-
ference received, including interfer-
ence that may cause undesired
operation.
3. The transceiver has been tested and
complies with RSS and Industry
Canada rules. Changes or modifi-
cations not expressly approved by
the party responsible for compli-
ance could void the user's authority
to operate the device.
is a registered trademark and
Zeeland, Michigan.
® is a registered trademark
by Johnson Controls,
3-29
3