Modes And Functions; Add Mode; Manual Mode - Semacon S-1200 Series Operating Manual

Add Mode

Adding during count mode is performed by pressing the ADD button (green LED will light next
to the button when activated). With this mode turned on, the machine will add the count for each
stack of bills to the previous total.
NOTE: Add mode can also be used when batching if the operator selects a batch stop setting
while Add mode is activated.
Manual Start Mode
If you do not want the machine to start counting automatically when banknotes are placed in the
hopper, you can press the MNL button (green LED will light next to the button when activated).
This turns on the Manual Start Mode. In this mode, the machine will not start counting until the
START button is pressed.
Batching
1) To set a batch stop setting, enter any number from 1-999 using the numeric buttons and the
setting will appear in the upper display on the control panel. For example, to set the batch limit to
"50", press the 5 key and then press the 0/C key.
2) Place banknotes in the hopper. The machine will start counting and will stop once the counted
number reaches the preset batch number.
3) To repeat the batch counting, simply remove the banknotes from the stacker and the machine
will count the next batch.
4) To clear the batch stop setting, press the 0/C button until nothing appears above the count on
the display.

MODES AND FUNCTIONS

7