Net World Sports Forza Manual page 4

Step 2. Fit hoop and End cap.
Slide 2 M10x20 (PA38101) bolts into the channel at 1 end of the assembled post, locate
the hoop (PA45292) over the bolts and choose the required position. Once the Hoop is in position
secure in place with M10 washers and M10 lock nut. Once hoop is attached tap rubber (PA45288)
end cap into place with a rubber mallet. See Fig.2. and Fig.2a
Please note that the net should be attached the hoop at this point.
PA38101
PA45288
Step 3 - Socket installation.
Over leaf is a guide to ground socket installation outdoors. We recommend
seeking advice from an expert sports hall contractor for installation of sockets
indoors.
Sockets should be installed by a competent person or persons with knowledge
of this kind of work.
3.
Fig.2
PA38115
Fig.2a