Page 2
Hammer/Mallet Remove the hair clip and pin from row unit 1 and slide the Using the two short 1/2” bolts 5 attach the 360 BANDIT closing system 2 off. unit (long leg to the rear) to the row unit where the closing Wrench Sizes: 15/16”...
Page 3
If the disk does not freely turn, back off the lock nut slightly until the disk freely turns. Using a mallet, install provided dust caps over disk bolt heads. Route application hose through hole in top of 360 BANDIT frame Repeat for other side. PAGE 3...
Page 4
Attach the plumbing assembly to each of the hoses coming system to the BANDIT unit. (not included) in the plumbing to each row prior to the 360 from the house guides BANDIT orifi ces. Check valve is available at Dultmeier Sales Reinstall insecticide attachment, if present.
Need help?
Do you have a question about the BANDIT HARVEST INTERNATIONAL and is the answer not in the manual?
Questions and answers