Advertisement
Quick Links
360 B A N D IT
™
I N S T A L L A T I O N I N S T R U C T I O N S
G R E A T P L A I N S M O D E L S
� � �
3 6 0 Y I E L D C E N T E R . C O M
���
���
F O R Q U E S T I O N S P L E A S E C O N T A C T O U R
P R O D U C T S U P P O R T T E A M A T 3 0 9 - 3 0 0 - 3 1 2 0
5 . 2 6 . 2 0 � V4
All trademarks are the property of 360 Yield Center, its aff iliates and/or its licensors. ©2019 360 Yield Center. All rights reserved.
Advertisement
Related Manuals for 360 BANDIT GREAT PLAINS
Summary of Contents for 360 BANDIT GREAT PLAINS
- Page 1 P R O D U C T S U P P O R T T E A M A T 3 0 9 - 3 0 0 - 3 1 2 0 5 . 2 6 . 2 0 � V4 All trademarks are the property of 360 Yield Center, its aff iliates and/or its licensors. ©2019 360 Yield Center. All rights reserved.
- Page 2 Release spring 1 to remove tension from closing system. Using one of the long bolts 3 and one of the short bolts 4 from the provided hardware kit, attach the 360 BANDIT NOTE: If the optional chains kit is not being installed do not Wrench Sizes: 15/16”...
- Page 3 If the disk does not freely turn, back off the lock nut slightly until the disk freely turns. Repeat for other side. Route application hoses through hole in top of 360 BANDIT frame Using a mallet, install provided dust caps over disk bolt heads.
- Page 4 (Inlet x Outlet) 3/8” O.D. check valve Attach the plumbing assembly to each of the hoses coming (not included) in the plumbing to each row prior to the 360 from the house guides BANDIT orifi ces. Check valve is available at Dultmeier Sales NOTE: If hoses are not fully seated in the push to connect, (Item #BUCV1103-P38).
Need help?
Do you have a question about the BANDIT GREAT PLAINS and is the answer not in the manual?
Questions and answers