Braun Cruzer Body Series Manual page 8

Place the shaving system (3) on the stretched skin and gently move it
against the direction of hair growth.
Do not apply too much pressure and always keep your skin stretched.
Make sure the shaving system is in full contact with the skin.
When using the shaving system, we recommend using Gillette shaving
foam or gel.
Protection sleeve / holder for the shower
The cruZer body comes with a protective cover that can also be used as a
shower holder.
When used as a protective cover, insert the cruZer body with the trimmer
facing inwards.
When using it as holder, insert the cruZer body with the trimmer facing
outwards (see picture 9).
Cleaning and maintenance
After each use, clean the cruZer body.
Remove the trimming comb and brush it out.
You may also use the brush to clean the trimmer if it has been used for dry
applications only.
If you have used the cruZer body with shaving gel or foam, rinse it under hot,
running water as shown (in picture f). Shake well to remove excess water
and leave to dry.
Apply a drop of light machine oil onto the trimmer on a weekly basis.
Replacing the shaving system
The shaving system (3) has to be replaced when the green stripe becomes
discoloured. Use Gillette Fusion cartridges only.
Extend the slider, press the release button (4) to eject the used shaving
system.
Insert the appliance into the refill organizer to collect a new one (picture g).
Environmental notice
Product contains batteries and/or recyclable electric waste. For
environment protection do not dispose of in household waste, but
for recycling take to electric waste collection points provided in your
country.
9