Triax CSE 2800 Assembly Instruction Manual page 21

• After switching on the head-end station the "Select module / channel strip"
– "SETUP BE160" menu appears in the display. Activate this menu by re-
peatedly pressing
Ein/On
• Press the
• Using the
system.
• Press the
Standard of the output signal
• Using the
system.
• Press the
if needed.
SETUP BE160
V 10
M
button.
—> The "Set output level" – "OUTPUT Level" menu is activated.
SETUP
Level
buttons, set the RF output level as required for the cable
—> The control voltage for a retrofittable active output collector is set.
button.
—> The "Standard of the output signal" – "NORM" menu is activated.
SETUP
PAL BG
buttons, set the output standard as required for the cable
—> Always all modulator modules are set. Mixed operation is not pos-
sible!
—> The used modulator modules must support the selected standard.
button.
Bx 1A
Böx 4
Bx 1A
C5-12,S3-24
C5-12,S3-24
OUTPUT
0
NORM
- 21 -
TWIN-SAT
TWIN-SAT
DVBT
C07
C07
C 69
CSE 2800