Upright Mounting - Triax CSE 2800 Assembly Instruction Manual

u
p r i G h t
• Align the studs
head-end station housing and snap it into place. The distance between
the underside of the head-end station and the lower edge of the mounting
bracket is approx. 75 mm.
• Screw in the 6 thread-forming countersunk screws
• Attach the mounting bracket to the other side of the housing in the same
manner.
m o u n t i n G
1
3
1 on the mounting bracket
2
1 1 1
Fig. 15
3
- 15 -
75 mm
with the hole matrix on the
that were supplied.
2
CSE 2800