Safety, Noise And Vibration Plates; Position Of The Safety Plates - Komatsu PC18MR-3 Operation & Maintenance Manual

SAFETY, NOISE AND VIBRATION PLATES

2.1 SAFETY, NOISE AND VIBRATION PLATES

2.1.1 POSITION OF THE SAFETY PLATES

The safety plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or
q
grease, it is necessary to clean them with a solution made of water and detergent.
Do not use fuel, petrol or solvents.
If the plates are damaged, ask for new ones to Komatsu or to your Komatsu Distributor.
q
In case of replacement of a component provided with a safety plate, make sure that such a plate is applied also
q
to the new part.
The machine can be provided with other plates in addition to those indicated below; keep also to the instructions
q
given in the additional plates, in any case.
24
RKA31700
WEAM012101