Komatsu PC18MR-3 Operation & Maintenance Manual page 174

TRANSPORTING THE MACHINE
6. Set the safety device lever to working position (F).
7. Run the engine at low speed.
(A): Idling
8. Lift the blade.
9. Raise the work equipment, make sure that the travelling di-
rection of the machine corresponds to the direction of the
ramps, and proceed slowly.
Lower the work equipment as much possible, without caus-
ing any interference.
When the machine is on the ramps, operate only the travel
levers. Do not operate any other lever or pedal.
172
RKA22540
RKA23970
WEAM012101