Triax TMB 10A Mounting Instruction page 3

G e n e r a l i n f o r m
G e n e r a l
i n f o r
G e n e r a l i n f o r
The processing units in the TMB10 range are used to selectively filter analogue and digital UHF
channels. These units also couple and amplify VHF programmes according to the satellite band model
(IF).
TMB10 units have one amplified wide band coupling input; 10 UHF filters, distributed over 3 inputs
with programmable bandwidth from 1 to 6 channels (8 to 48 MHz), making it suitable for most
situations.
An individual setting for each filter or frequency band, and automatic control of the UHF output level,
for aligning service plan levels.
TMB-10A – Ref.: 324575
5 inputs:
BI - FM, BIII - DAB, AUX, UHF1, UHF2
UHF Gain = 55 dB
BI - BIII Gain = 48 dB
AUX Gain = 39 dB
UHF output level = 124 dBµV (DIN 45004B)
TMB-10B – Ref.: 324576
6 inputs:
BI - FM, BIII - DAB, AUX, UHF1, UHF2, UHF3
UHF Gain = 55 dB
BI - BIII Gain = 48 dB
AUX Gain = 39 dB
UHF output level = 124 dBµV (DIN 45004B)
TMB-10S – Ref.: 324577
8 inputs:
BI - FM, BIII - DAB, AUX, UHF1, UHF2, UHF3, 2 x SAT
SAT Gain = 40 dB
UHF Gain = 48 dB
BI - BIII Gain = 43 dB
AUX Gain = 33 dB
UHF output level = 120 dBµV (DIN 45004B)
SAT output level = 120 dBµV (EN 50083-3)
a t i o n
m a t i o n
m a t i o n
3
GB