D-Link DAP-1820 Quick Install Manual page 5

When the Status LED turns solid green (may take up to 3 minutes), this indicates
4
that your Range Extender is securely connected to your wireless router.
Note: If the Status LED on your Range Extender does not turn solid green
after running WPS setup, try resetting the unit (see Troubleshooting - What
if I forgot my Range Extender's Admin password or want to reset my Range
Extender?) and try WPS setup again. If it still does not turn solid green after
following all the steps, see Method Two: D-Link Wi-Fi Setup, on page 6.
Your setup is complete! You can now unplug and move your Range Extender to a
location between your Wireless Router and the area where you want wireless coverage.
By default, your Range Extender will share the same name and password as your
Router.
If after moving your Range Extender, the signal strength indicator is showing one
single amber bar or if your Range Extender LED does not turn solid green within 3
minutes, move your Range Extender to a wall outlet closer to your wireless router.
Very Weak (1 x Amber) Weak (1 x Green)
DAP-1820 Install Guide
Signal Strength Indicator
Good (2 x Green) Strong (3 x Green)
5