heightec RescuePack WK32 User Instructions

WK32 - RescuePack
This equipment should only be used by Competent Persons, who have been trained in the use of this specific kit.
These user instructions are to be read in conjunction with user instructions for each item of the kit.

Lowering

1. Select an unquestionably sound anchorage structure,
above casualty.
2. Pass anchor strop (A)
karabiner to screwlink.
3. Fit open hook to end of pole. With control device half-
threaded, extend pole to casualty (B). Attach hook to
harness and pull to release, ensuring hook gate closes
fully.
4. Pull rope to casualty tight by pulling tail end through
device (C).
5. Fully thread control-device & lock-off by passing tail
rope loop through the screwlink then around device
(D).
6. Check all connections, then cut casualty's fall arrest
lanyard, with shears.
7. Remove the 'lock-off' and gently lower casualty by
holding tail rope and squeezing device handle into
'sweet spot' (E).
The heightec Group Ltd, Lake District Business Park, Mint Bridge Road, Kendal, Cumbria, LA9 6NH, UK
REF: UI WK32
TM
around anchorage and connect
Issued: 07/04/2011
c
A
D
Revised: 13/09/2019
User Instructions
B
E
Approved: CED