Onnto SC-M12CI Quick Start Manual page 6

2
11) Ensure that the LED indicator is properly aligned with the opening on the front panel of
the enclosure.
12) Fasten the rear panel to the enclosure housing by replacing the (2) screws removed in
step 1.
13) Fasten the last (1) screw to reattach the bottom panel.
14) The Enclosure Kit is now assembled and ready for connection to a computer.
file://E:\ONNTO-FOLDER\SC-M12CI+SC-M12O\35install.htm
2
1
Page 6 of 8
1/23/2005