How To Use The Buttons; Auto Operation; Cooling/Heating/Fan Operation - Nobu RG57B/BGE User Manual

How to use the buttons

3
ON/OF F
1
MODE
TEMP
FAN
SLEEP
SWING DIRECT
TURBO
TURB O SELF CLEAN
LED
LED FOLLOW ME
3
ON/OF F
1
MODE
TEMP
FAN
SLEEP SWING DIRECT
TURBO
TURB O SELF CLEAN LED
LED FOLLOW ME

Auto operation

Ensure the unit is plugged in and power is available.
The OPERATION indicator on the display panel of the
indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the desired
3. Press the ON/OFFbutton to start the air conditioner.
2
NOTE
1. In the Auto mode, the air conditioner can logically
SHOR T
CUT
TIMER
ON
TIMER
OFF
2. In the Auto mode, you can not switch the fan speed. It
3. If the Auto mode is not comfortable for you , the
Cooling /Heatinq/Fan operation
Ensure the unit is plugged in and power is available.
1. Press the MODE button to select COOL,
2. Press the UP/DOWN buttons to set the desired
3. Press the FAN button to select the fan speed in four
4. Press the ON/OFF button to start the air
NOTE
2
In the FAN mode, the setting temperature is not displayed
in the remote controller and you are not able to control
SHOR T
the room temperature either. In this case, only step 1, 3
CUT
and 4 may be performed.
TIMER
ON
TIMER
OFF
temperature. The temperature can be set within a
range of 17°C~ 30°C in 1 °C increments.
choose the mode of Cooling, Fan, and Heating by
sensing the difference between the actual ambient
room temperature and the setting temperature on the
remote controller.
has already been automatically controlled.
desired mode can be selected manually.
HEAT(cooling & heating models only) or FAN mode.
temperature. The temperature can be set within a
range of 17°C~ 30°C in 1 °C increments.
steps-Auto, Low, Med,or High.
conditioner.
8