Timer Operation - Nobu RG57B/BGE User Manual

ON/OF F
SHOR T
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SWING DIRECT
SLEEP
TURBO
TURB O SELF CLEAN LED
LED FOLLOW ME

Timer operation

Press the TIMER ON button can set the auto-on
time of the unit. Press the TIMER OFF button
can set the auto-off time of the unit.
To set the Auto-on time.
1. Press the TIMER ON button. The remote controller
shows TIMER ON, the last Auto-on setting time and
the signal "H" will be shown on the LCD display area.
Now it is ready to reset the Auto-on time to START
the operation.
2. Push the TIMER ON button again to set desired
Auto-on time. Each time you press the button, the
1
time increases by half an hour between 0 and 10
hours and by one hour between 10 and 24 hours.
2
3. After setting the TIMER ON ,there will be a one
second delay before the remote controller transmits
the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" will
disappear and the set temperature will re-appear on
the LCD display window.
To set the Auto-off time.
1. Press the TIMER OFF button. The remote controller
shows TIMER OFF, the last Auto-off setting time and
the signal "H" will be shown on the LCD display area.
Now it is ready to reset the Auto-off time to stop the
operation.
2. Push the TIMER OFF button again to set desired
Auto-off time. Each time you press the button, the
time increases by half an hour between 0 and 10
hours and by one hour between 10 and 24 hours.
3. After setting the TIMER OFF ,there will be a one
second delay before the remote controller transmits
the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "H " will
disappear and the set temperature will re-appear on
the LCD display window.
10