Advertisement
Using the Air Conditioner - Controls
Appearance may vary.
SLEEP
1. POWER
Turns air conditioner on and off.
2. Display
Displays the temperature setting. Displays hours when
setting the timer.
3. Mode
or FAN modes. Indicator lights on the controls will show
the mode selected.
4. Temp Increase + / Decrease - Pads
(on some models) mode.
5. Fan Speed
To ensure proper operation, aim the remote control at
the signal receiver on the air conditioner.
The remote control signal has a range up to 21 feet.
4
HEAT
AUTO
COOL
DRY
ON
OFF
TIMER
MODE
Air Conditioner Controls
•
Lights below the touch pads on the control panel indicate
AUTO
LOW
FAN
FAN
the selected settings
6. Timer
ON
from .5 to 24 hours later.
OFF
from .5 to 24 hours later.
7. Filter
Monitors accumulated fan run time as a reminder to clean
the filter.
8. Eco
ON:
off.
OFF:
heating (on some models) mode.
9. Sleep
Allows room temperature to increase (Cool mode) or
decrease (Heat mode) during sleeping hours.
Remote Control
Make sure nothing is between the air conditioner and
the remote control that could block the signal.
Make sure the battery is fresh and installed correctly—
see the Care and Cleaning section.
MED
HIGH
POWER
ECO
FILTER
ON
OFF
49-5000492 Rev. 0
Hide quick links:
Advertisement
