Advertisement
Taking care of your machine
Removing and cleaning the nozzle
Remove both tanks and tilt the carpet washer so it is lying
on its back.
Rinse nozzle under water
to remove debris.
Removing blockages from the brushbar
Using a pair of scissors
remove any threads or hair
caught around the brushbar.
Replace the nozzle by lining up the tabs on the nozzle
with the tabs underneath the front of the carpet washer.
Push the nozzle backwards until the clip clicks into place.
Lift the nozzle release clip and pull the nozzle forward
separating the nozzle from the carpet washer.
Hide quick links:
Advertisement
