Quoizel MLO8409WT Installation Manual

Please go to www.quoizel.com
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source: (1) A19 Medium Base Bulb 100W Maximum, bulb not included.
Estimated Assembly Time:
Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
Fixture can only be mounted in the direction indicated on page 2.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Do not touch the bulb with bare hands use a cloth or glove.
Package Contents
Crossbar
A
x 1
Mounting Screw
B
x 2
STEP 1 - Install the Crossbar to the junction box
A. Attach the Crossbar (A) to the Outlet Box with the head of the Green
Ground Screw facing you. Secure it with Outlet Box Screws (not
included), tighten until snug.
Outlet Box
Green Ground Screw
STEP 2 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
White wire
from outlet box
Black wire from
outlet box (or Red)
Bare, or Green
Ground wire
from outlet box
Green Ground Screw
on the Crossbar
2018 QuoizelInc.
for product cleaning tips. Go to the
20-30 minutes
Glass Shade
C
x 1
Fixture
D Body
x 1
Lock Screw
E
x 3
Supply Wires
with Ground Wire
Outlet Box Screws
(not included)
A
Figure 1
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Figure 2
visit us on-line at www.quoizel.com
Installation Guide #IS-MLO8409WT
For Style MLO8409WT
Care + Maintenance selection.
(Step 2 Continued)
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
STEP 3 - Install the Fixture Body
A. Place the backplate of the Fixture Body (D)
onto the Crossbar (A) and secure with
Mounting Screws (B). Tighten until snug with
screwdrivers.
STEP 4 - Install Bulb and Glass
Shade
A. Insert the Bulb onto the socket and
push snugly into properly.
B. Thread the Glass Shade (C) onto
the socket and secure with Lock
Screws (E). Hand tighten until
snug.
Your fixture is now assembled and
ready to use. Enjoy!
1of2
Backplate
A
B
Figure 3
Figure 4
ReleasedDate:2019-02-19
D
E
D
Vintage Bulb
(recommended
but not included)
C