Components
OFF
EMU26103
Power tilt switch
The power tilt system adjusts the outboard
motor angle in relation to the transom. Push-
ing the switch "
" (up) tilts the outboard mo-
tor up. Pressing the switch "
the outboard motor down. When the switch is
released, the outboard motor will stop in its
current position.
UP
DN
32
ON
START
ZMU01718
" (down) tilts
ZMU01720
TIP:
For instructions on using the power tilt
switch, see pages 60 and 62.
EMU31433
Steering friction adjuster
A friction device provides adjustable resis-
tance to the steering mechanism, and can be
set according to operator preference. An ad-
juster lever is located on the bottom of the til-
ler handle bracket.
To increase resistance, turn the lever to the
port side "A".
To decrease resistance, turn the lever to the
starboard side "B".
EWM00041
WARNING
Do not overtighten the friction adjuster. If
there is too much resistance, it could be
difficult to steer, which could result in an
accident.