Lorex LHB926 Series Instruction Manual page 21

Hide thumbs Also See for LHB926 Series:

Table of Contents

Basic Setup

4. Lower the camera base onto the mounting bracket so the 2 tabs in the mounting bracket lock

into the 2 slots in the camera base.

LWB4800 / LWB4900 Series

5. Insert the security screw through the fasteners on the top of the camera base and mounting

bracket to secure the camera to the mounting bracket. Tighten using the included screwdriver

(item A+B in toolkit).

LWB4800 / LWB4900 Series

6. OPTIONAL: Tighten the pre-installed locking screw on the base of the Power Pack using the

included screwdriver (item A+B in toolkit).

NOTE

You will need to loosen the locking screw to remove the Power Pack in the future.

#LX400109; r. 2.0/54857/55689; en-US

LWB5800 / LWB6800 Series

Table of Contents

Show Quick Links

Table of Contents