Features; Caution When Ssembling Racks - Inter-m PD-6359 Operation Manual

Features

Features
- R CK SYSTEM POWER CONTROL
It controls the power of the rack system.
- C OUTLET TERMIN L
It consists of UNSWITCHED 1 group and SWITCHED 3 group, and in case of SWITCHED 3, it will be on/off for
every 2 seconds with sequential power.
- SUPPLY EMERGENCY POWER
It can supply the battery power to the unswitched power output terminal, so it will be switched to emergency
power in case of black out to supply the DC power to the system.
- MONITORING OF VOLT GE SUPPLYING ST TUS
The status of service voltage can be monitored through Windows program.
- REMOTE CONTROL
Power can be on/off from Windows program, and it can be controlled through the contact of remote terminal
without PC.
- C/DC VOLT METER
The status of service voltage can be monitored through front LED display consisting.
Caution when assembling the R CKs
Caution when assembling the R CKs
- When using this device, exclusive model for our rack should be installed.
- If you decide to use the components made of other company, rated capacity should be verified, and confirm it
with an authorized dealer near by.
- Rated capacity should be verified.
- Connecting it while power is off.
- Connect C and DC powers based on the power of the device to be connected.
- When supplying the rack power, interlock
power output (DC 24V, 5 ) should be less than rated outputs.
C OUTLET(Switched: 3 Group/Unswitched: 1 Group) and DC
POWER DISTRIBUTOR
3
PD-6359