Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode and the blue
light will blink quickly.
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode
by holding the reset button for five seconds until the light flashes blue
Using Smart Mode to add device
Once registered, tap "+" in the upper right corner of the app's home page to add a new
device through the network.
Select the product type from the list of options in the app Home Security > Door Bells,
and then select "Other Mode" from the top-right corner when asked to reset the
device.
rapidly.
Advertisement
