Advertisement
LED Indicator
No
Fast blinking blue LED (5 times per
1.
Slow blinking red LED (2 times per 3
2.
Slow blinking blue LED (1 time per 3
3.
4.
5.
6.
Paring the indoor chime to a Doorbell
1)
Select your favourite ringtone before pairing.
2)
Press and hold the volume control button for 5 seconds until a Ding-Dong is heard
and the LED indicator starts flashing to enter into pairing mode.
3)
Press the doorbell's ring button to send a signal to the chime. When the pairing is
successful, the indoor chime will play the selected ringtone automatically.
LED status
second)
seconds)
seconds)
Blue and Red LED are off
Fast blinking blue and red
Bright blue LED
Trying to connect to Wi-Fi
Ready or reset to successfully configure
Networking is successful and working
properly or watch live video
(Img: 1.1)
Device status
Connecting to service
Sleep mode or off-line
Firmware upgrade
Advertisement
