Advertisement
Set Ringtone
There are 52 ringtones to choose from:
1)
Press Forward or Back button to choose your favourite ringtone, the chime will play
the ringtone selected.
2)
Please follow the pairing steps to sync the new ringtone. The new ringtone will be
set for the most recently synced doorbell.
3)
The ringtone can be set differently for a different doorbell.
Two or more doorbells pairing
The pairing mode is available for a doorbell only each time. For two or more doorbells, please
follow the pairing steps once again to get the doorbell paired on by one.
Two or more indoor chimes pairing
Just need to follow the pairing steps to pair two or more indoor chimes to one doorbell.
Reset
Press the forward button for 5 seconds to reset the chime to default. When the chime sound
Ding-Dong with LED flashing that means reset succeeds, the setting is back to default: It
comes bad to the 1st music, no doorbell is paired with the chime.
Charging Your Doorbell
•
Loosen the screw at the bottom of the doorbell and remove the doorbell from the
bracket. You will hear the alarm sound for approximately 1 minute.
•
Take the device inside for charging. Using the supplied micro USB cable, connect
the device to a 5V/2A USB power adaptor and allow the unit to charge for a
minimum of 4 hours. (For convenience, you can use the USB adaptor of your mobile
phone).
Advertisement
