LG GBB62SWGFN Owner's Manual page 33

Symptoms
Whooshing noises
Gurgling noises
Popping noises
Vibrating
Your home appliance
and smartphone is
not connected to the
Wi-Fi network.
Evaporator fan motor is circulating air through the fridge and freezer
compartments.
• Normal Operation
Air is being forced over the condenser by the condenser fan.
• Normal Operation
Appliance flowing through the cooling system
• Normal Operation
Contraction and expansion of the inside walls due to changes in
temperature.
• Normal Operation
If the side or back of the appliance is touching a cabinet or wall,
some of the normal vibrations may make an audible sound.
• To eliminate the noise, make sure that the sides and back do not make
any contact with any wall or cabinet.
The password for the Wi-Fi that you are trying to connect to is
incorrect.
• Find the Wi-Fi network connected to your smartphone and remove it,
then register your appliance on LG SmartThinQ
Mobile data for your smartphone is turned on.
• Turn off the Mobile data of your smartphone and register the appliance
using the Wi-Fi network.
The wireless network name (SSID) is set incorrectly.
• The wireless network name (SSID) should be a combination of English
letters and numbers. (Do not use special characters.)
The router frequency is not 2.4 GHz.
• Only a 2.4 GHz router frequency is supported. Set the wireless router to
2.4 GHz and connect the appliance to the wireless router. To check the
router frequency, check with your Internet service provider or the router
manufacturer.
The distance between the appliance and the router is too far.
• If the distance between the appliance and the router is too far, the
signal may be weak and the connection may not be configured
correctly. Move the location of the router so that it is closer to the
appliance.
Reason&Solution
EN
33