EMOJO PROWLER Owner's Manual page 22

Power Shut Off Troubleshooting
If your EMOJO Prowler experiences a sudden power shut off while in use, this can be related to several reasons but the problem could have
an easy fix.
1-Open the motor box by removing the left side cover, gently pull
the wiring and check all wiring connections
( Fig 1):
3-Check the power quick disconnect plug:
a) Check the quick-disconnect plug wire to make sure is properly attached
to the motor. (Fig 2)
a) ) Disonnect the brake handle sensors from the controller box, turn the LED display at the handlebar, if it continues to blink reconnect the wires
and move to the next step.
b) Disconnect the throttle sensor from the controller box, turn the LED display at the handlebar, if it continues to blink reconnect the wires and
move to the next step.
c) ) Diconnect the speed sensor from the controller box, turn the LED display at the handlebar, if it continues to blink there could be a problem with
the controller box and would need to be replaced.
Fig. 1
Fig. 2
Quick Disconnect (Lef side)
20