EMOJO PROWLER Owner's Manual page 11

Pedal Assist Mode Control
Your model EMOJO PROWLER is equipped with an handlebar
control module to turn on and set the PAS (Pedal Assist).Before
you turn the control on, make sure the battery is fully inserted into
the bike, properly connected and the on/off switch is in the on "I"
position.
PEDAL ASSIST
ADJUSTMENT
BUTTONS
Press the power button on the control module
located near the left grip on the handlebars to tum it on.
You can adjust the pedal assist power level to have more power
by hitting the [ +] button (right button) and can move to a lower
level power by hitting the [-] button (left button).
When not riding your bike, you can tum off the meter by holding
down the power button (M button) for several seconds.
1-Power On/Off
Press the Power button to power on the display. To power off display and power supply to the
bicycle press and hold for 3 seconds
2-Lights
There is a preset button to turn on'off a headlight if you shall install one (optional equipment,
headlight is not included)
BUTTON FOR HEADLIGHT
INSTALLATION
(OPTIONAL)
3-Menu
Press the "i" button on the control to access and navigate the menus on the screen.
POWER BUTTON
When the speed field displays SPL, the distance field displays the value of
the speed limit. Minimum speed limit is 12km/h,
maximum speed limit is 60km/h.
After setting, Briefly Press (< 0.3 seconds) to enter the menu of battery
com-munication.
MENU BUTTON
Controls
Speed limit settings
9