Parameter Settings - EMOJO PROWLER Owner's Manual

Pedal Assist Mode LCD Screen
1
2
3
4
5
Up button
Down button
1-Battery level
2-Maintenance warning
6 3-Headlight indicator
4-Distance mode
5-Assistance
7
6-Malfunction indication
7-Menu
8-Speed display mode
9-Speed mode
8
10-Distance indicator
11-PAS level indicator
9
10
11
Headlight button
Power button
Mode button

PARAMETER SETTINGS

• Items to be Set
1
〉Data reset
2
〉Km/mile
3
〉Light sensitivity
4
〉Display backlight brightness
5
〉Automatic off time
6
〉Maintenance warning settings
7
〉Check wheel diameter
8
〉Speed Limit Setting
9
〉Speed model
10
〉Battery infromation10 error code
Setting Preparation
•
• When the display is active, press twice (interval < 0.3 seconds). The system
will enter the MENU parameter setting state, in which the display parameters
can be set.
• If no operation is performed for 10 sec-onds, the display will return to the
normal riding display.
• In the parameter setting state, when the parameter you want to set begins to
flash, press the + or - buttons to adjust the value of parameters. Press the "i"
button to switch between parameters to be set. Press the "i" button twice to
exit the submenu.
• Press the "i" twice (interval < 0.3 seconds) –the display enters the MENU
state. In the speed field tC is displayed. If you press a "y" is also displayed.
Now all temporary data, e.g. maximum speed (MAXS), average speed
(AVG) and single trip distance (TRIP) can be cleared. Briefly press the "i"
button (< 0.3 sec-onds) to enter the km/mile setting interface.
• If you do not reset the data, the single trip distance and the accumulated
total rid-ing time will be automatically cleared when the accumulated total
riding time exceeds 99 hours and 59 minutes.
• * The data will not be cleared when the display's light-sensing function is set
to 0 or when it is switched off!
• Km/mile
When the speed field displays S7, press
+/- to switch between km/h and mph, or to set km or mile. After this setting, briefly press the
"i" button (< 0.3 seconds) to enter the setting interface of light sensitivity. Default display is
km.
11