Dell Inspiron 7405 2n1 Service Manual page 56

Advanced
Battery Charge Configuration
Advanced Battery Charge Configuration
Sleep Mode
Maintenance
Data Wipe on next boot
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
SupportAssist System Resolution
Auto OS Recovery Threshold
SupportAssist OS Recovery
Table 5. System setup options—Security menu
Security
Admin Password Status
System Password Status
HDD2 Password Status
Service Tag
Admin Password
System Password
HDD2 password
Password Change
Computrace
56 System setup
Set the battery charge settings with a preselected custom charge
start and stop.
Default: Adaptive
Enable Advanced Battery Charge Configuration from the
beginning of the day to a specified work period.
Default: Disabled
Selects the power-saving state when your computer is idle.
Default: OS Automatic Selection
Enables or disables data wipe on the next boot.
Default: Disabled
Enables the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive or
an external USB key.
Enables BIOS to automatically recover BIOS without user actions.
Default: Disabled
Controls the automatic boot flow for SupportAssist System
Resolution Console and for the Dell OS Recovery tool.
Default: 2
Enables or disables the boot flow for the SupportAssist OS
Recovery tool in the even of certain system errors.
Default: Disabled
Displays if the administrator password is clear or set.
Displays if the system password is clear or set.
Default: Not Set
Displays if the HDD password is clear or set.
Default: Not Set
Set your system's Service Tag.
Allows you to set the administrator password. The administrator
password controls access to the system setup utility.
Allows you to set the system password. The system password
controls access to the computer at boot.
Allows you to set, change, or delete the hard-disk drive
password.
Allows you to permit or deny system password or HDD password
changes.
Default: Permitted
Enables or disables the BIOS module interface of the optional
Computrace Service from Absolute Software.
Default: Deactivate