Dell Inspiron 7405 2n1 Service Manual page 55

Table 4. System setup options—Advanced menu
Advanced
PowerNow! Enable
Virtualization
Integrated NIC
USB Emulation
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Keyboard Illumination
Keyboard Backlight with AC
Keyboard Backlight with Battery
Express Charge
Battery Health
Camera
Enables or disables the dynamic frequency scaling and power-
saving technology for the AMD processor.
Default: Enabled
Enables or disables the Virtualization technology.
Default: Enabled
Enables or disables the on-board LAN controller.
Default: Enabled
Enables or disables the USB emulation feature. This feature
defines how the BIOS, in the absence of a USB-aware operating
system, handles USB devices. USB emulation is always enabled
during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
Allows you to enable USB devices to wake the computer from
standby or to disable the USB wake support feature.
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Default: Disabled
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported by
your computer.
Default: Enabled
Allows you to set function key or multimedia key as the default
function key behavior.
Default: Multimedia key
Selects the operating mode of the keyboard illumination feature.
Default: Bright
Selects the timeout value for the keyboard backlight when an AC
adapter is plugged into the computer.
Default: 1 minute
Selects the timeout value for the keyboard backlight when the
computer is running on battery power.
Default: 1 minute
Selects the battery charge mode.
Default: Express Charge
Displays the battery health.
Enables or disables the camera.
Default: Disabled
System setup 55