System Parameters - Baileigh Industrial PT-44AH-W Operator's Manual

Controller operation

Hide thumbs Also See for PT-44AH-W:

Operator's manual (48 pages)

Table Of Contents

Table of Contents

• THC Sensitivity: This is sensitivity reflected by THC (lifter) motor. The larger the value the

more sensitive the system will be to Arc Voltage variation. When the value is set too high,

the torch will become unstable and bounce while moving. The normal range is set as 30-

50%, the full range is 0.00-100.00. Unit: %.

• Arc Set Step Value: From the cutting main screen, Increase or decrease the Set Arc Voltage

value with each press of either F7 or F6. The range of value is 0.10-10.00. Unit: V.

• Fast IHS Time: The lifter motor runs time in full speed when HIS (initial height sensing). Then

the lifter motor runs the half speed until the torch contact the steel plate. Unit: s. Note: Fast

IHS Time cannot be more than Position Check Time. Fast IHS Time range of the value is

5.00-100.00. Unit: V. Default 6.

• Flame Updown Speed: Not used.

• Plasma Updown Speed: Speed at which the torch lifts and lowers when reacting to a torch

height correction command. The normal range is set as 100.00%, the full range is 0.00-

100.00. Unit: %.