Changing the Camera Positions (Step by Step)
Sensor Setup
7.3.13 Rotate Cameras Against Eccentric Stop and Fix Them
in camera position 400 (see section 3).
The figures show the eccentric stop
Fix the camera screws with a torque of 5 Nm.
If for one camera position two eccentric stops are available, please read in section 3.1 which
stop you need to use.
7.3.14 Mount Upper Part of Housing
Ensure that the cables run optimally before mounting the upper part of the housing!
Please do not squeeze any cable when mounting the upper part of the housing!
Page 21 (44)