Table of Contents
Advertisement
Attaching the banners
Attention:
the purchase of the banner is optional.
Eurotramp - Trampoline Kurt Hack GmbH
4
•
Hook the springs onto the jumping bed.
5
•
Then hook the springs - parallel side - with the
mounting tool onto the frame first.
•
Always hook the springs on opposite sides
in at the same time to prevent unnecessary
excess tension on the springs.
6
•
Attacht the remaining springs.
•
Here also hook the springs on opposite sides
in at the same time to prevent unnecessary
excess tension on the springs.
1
•
Remove the foil on the supplied Velcro and
attach on the flat surface on each side of the
frame (close to the outer edge) and fix the
banner on the Velcro.
Attention:
the
!
spring ears should
point downwards!
!
Put the round steel bars into
both sides of the hemstich
in the lower side of the
banner.
7
Advertisement
Table of Contents
