Table of Contents
Advertisement
To Install the HBA
3.
Press down on the plastic tab to release the ExpressModule latch and pull the
lever out until it is nearly perpendicular to the ExpressModule front panel.
4.
Insert the HBA into its slot, being careful that the extension on the bottom of the
lever does not come into contact with the chassis sheet metal during insertion.
5.
When the HBA is inserted nearly all the way into its slot, push the lever back into
its fully closed position, allowing the lever extension to insert the HBA fully into
place.
22
StorageTek Dual 8Gb FC Dual GbE HBA, ExpressModule, Emulex Installation Guide For HBA Models SG-
XPCIEFCGBE-E8-Z, SG-PCIEFCGBE-E8-Z, SG-XPCIEFCGBE-E8-N, SG-PCIEFCGBE-E8-N and 7105393 • August
2018
Advertisement
Table of Contents
