Table of Contents
Advertisement
HBA Features and Specifications
The HBA is also backward compatible with FC ports that operate at 4 and 2 Gbit/second. The
Gigabit Ethernet ports can be configured to operate in 10-, 100-, or 1000-Mbit/second Ethernet
networks.
See
Table 1, "HBA Features and Specifications," on page 10
TABLE 1
HBA Features and Specifications
Feature
PCI connector
PCI signaling environment
PCI lane usage
PCI transfer rate (maximum)
Number of FC ports
Number of devices supported
FC bus type (external)
FC data rates
FC topologies
Number of GbE ports
GbE interface type (external)
GbE transfer rate
RAM
BIOS ROM (FC)
BIOS ROM (GbE)
NVRAM (FC)
NVRAM (GbE)
External connectors
Maximum FC cable length
10
StorageTek Dual 8Gb FC Dual GbE HBA, ExpressModule, Emulex Installation Guide For HBA Models SG-
XPCIEFCGBE-E8-Z, SG-PCIEFCGBE-E8-Z, SG-XPCIEFCGBE-E8-N, SG-PCIEFCGBE-E8-N and 7105393 • August
2018
Description
x8
PCI-Express x8 (8 active lanes)
FC x4 lanes
GbE x4 lanes
PCI-Express Generation Two (5 Gbit/second) x8
Two
126 devices per FC loop; 510 devices in Fabric mode
Fiber-optic media, short-wave laser, multimode fiber (400‐M5- SN-S)
2.125, 4.25, 8.5 Gbit/second (auto-detected)
Switched fabric (N_Port), arbitrated loop (NL_Port) and point-to-point (N_Port)
Two
IEEE 802.3 compliant, copper, UTP RJ-45
10/100/1000-Mbit/second per port, autosensing, full-duplex
1.5 MB, parity protected, per port
One 4-MB flash ROM, field-programmable
One 1-MB flash ROM
One 2-KB EEPROM
One 128-KB EEPROM
Two Small Form-factor Pluggable (SFP) optics with LC-style connectors and two RJ-45 GbE
connectors
2 Gbit/second:
500 meters using 50/125 mm core OM3 fiber
300 meters using 50/125 mm core OM2 fiber
150 meters using 50/125 mm core OM1 fiber
150 meters using 62.5/125 mm core fiber
4 Gbit/second:
380 meters using 50/125 mm core OM3 fiber
150 meters using 50/125 mm core OM2 fiber
70 meters using 50/125 mm core OM1 fiber
for a list of the HBA features.
Advertisement
Table of Contents
