TC-Helicon VoicePrism Software Upgrade page 3

TC-IVL Ventures Inc.
21. Rotate the Data Wheel counter clockwise.
22. Confirm the corresponding value on the LCD decreases.
23. Rotate the Data Wheel counter clockwise until the 7 Segment Display shows "1".
24. Rotate the Lead knob fully clockwise.
25. Verify that the value displayed beside Lead on the LCD is 127.
26. Rotate the Lead fully counter clockwise.
27. Verify that the value displayed beside Lead on the LCD is 0.
28. Repeat steps 23 through 27 for the Harmony and Effects knobs.
29. Confirm all labeled black buttons are lit.
30. Press each button once to turn off its LED.
31. Press the Power switch to turn off the unit and exit BIST mode. (Note: Input and
Headphone Level Headphone Level Headphone Level Headphone Level are analog, and therefore
not tested in the BIST.)
TC Electronic A/S
Sindalsvej 34
DK-8240 Risskov
Denmark
Phone: +45 8742 7000 Fax: +45 8742 7010 E-Mail: www.service@tcelectronic.com
www.tc-helicon.com