1. Manuals
  2. Brands
  3. Axis Manuals
  4. Kitchen Appliances
  5. AX-S GLM12/N
  6. Installation & maintenance

Axis AX-S GLM12/N Installation & Maintenance

Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual

UNPACKING

Immediately on delivery unloading, please check whether machine packaging is eventually deteriorated
and in this case make necessary reservations on signing the delivery note. You will than check the
machine inside packaging and eventually contact immediately the carrier when it is damaged.
Prior to installation, test the electrical service to assure that it is in compliance with the specifications on
the machine data plate 1 .

ELECTRICAL

Warning: THIS MACHINE IS PROVIDED WITH THIS PLUG
TO PROPERLY GROUNDING PLUG, GROUNDED OUTLET. IF THE RECEPTACLE IS NOT THE
PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.

CLEANING

This machine must be thoroughly cleaned and sanitized after installation and before being put into
service.

SAFETY

SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR
CORRECT OPERATING POSITION EVERY TIME THE SLICER IS IN USE.
The blade cover 6
the hand knob 7 .
The Iast slice device 4 must be used when slicing, it keeps your hands away from the knife.
INSTALLATION
must be in position over the knife and secured by tightening
INSTALLATION
SLICER
1/4
AX-S GLM12/N
MUST BE CONNECTED
RETURN
Filename: Man_AX-S_GLM12_N_230609.PDM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AX-S GLM12/N and is the answer not in the manual?

Questions and answers

Related Manuals for Axis AX-S GLM12/N

Summary of Contents for Axis AX-S GLM12/N

  • Page 1 INSTALLATION MAINTENANCE SLICER AX-S GLM12/N INSTALLATION UNPACKING Immediately on delivery unloading, please check whether machine packaging is eventually deteriorated and in this case make necessary reservations on signing the delivery note. You will than check the machine inside packaging and eventually contact immediately the carrier when it is damaged.
  • Page 2 When the siicer is not working, the slicer thickness control 2 must be set on zero (fuIly clockwise) to prevent the blade edge from being exposed. Always UNPLUG the power cord before cleaning or moving the slicer. SLICING PuII the product holder 3 towards you until it stops and place the product to be sliced on the product holder tray.
  • Page 3 MAINTENANCE ATTENTION Use protection gloves ELECTRICAL SAFETY When the slicer is running the eventual removal of the blade cover 6 , or the default of electric power, causes the stop of the machine. To restart the slicer press the on-off switch 9 . SHARPENING OPERATION Your slicer blade will provide long service in normal deli, food store, or commercial kitchen use.
  • Page 4 DEFINITIONS MANUAL OPERATION Rotate the AUTO/MANUAL selector carriage release handle by 180 ,clockwise Push the on switch/blade start pushbutton Adjust the thickness you want by turning the slice thickness control knob Actuate the carriage by your hand Push the off switch/blade stop pushbutton AUTOMATIC OPERATION Rotate the AUTO/MANUAL selector carriage release handle by 180 , counterclockwise...

Table of Contents